Crossover L

CROSSOVER L2018-11-07T14:45:16+00:00

CROSSOVER L

The Crossover L has a minimalist and elegant design. This unique tent layout gives it a chic and hip vibe.

Design

The Crossover L has an innovative tent design and can be placed on hard or soft surfaces. The Crossover can easily handle extreme weather conditions like heavy rain, storm, extreme heat or cold and snow. The roof can handle a big snow load and is good to hold 400 kg of hardware.

Stage roofing

The Crossover L is mountable on a stage can be used in a variety of ways, for example to create a VIP-deck. The tent fits on most staging systems such as Layher (stitch 2072mm/non metric).

Quick & easy assembling

The Crossover L can be assembled in one hour by two persons with a little help of a crane or telescopic lift. The small components are made of a special aluminum. That way they are very easy to handle and light weight but strong as steel. The components are easy to handle and there is no muscle strength or tools required.

Download our building manual here or take a look at the installation video’s on our Youtube channel.

USE AS

•  Central/common area

•  Event space

•  Stage roofing

•  Combine with our smaller tents

READY TO START YOUR OWN PROJECT?

CONTACT US

SPECIFICATIONS

Sizes Crossover L

Crossover L Sizes
Diameter 68 m²
Distance from leg to leg823 cm
Height bottom to top495 cm
Height entrance 250 cm
Packaging tubes stacked vertically120 x 80 x 230 cm (l x w x h), 383 kg
Packaging tubes stacked horizontally220 x 80 x 140 cm (l x w x h), 383 kg
Packaging cover (Airtex)66 kg
Packaging side panel (Airtex)12 kg
Packaging connection gutter2 kg
Ballast support100 x 94 x 7 cm (l x w x h), 25 kg
Ballast interface 1 Crossover unit50 x 23 x 6 cm (l x w x h), 6 kg
Ballast interface multiple Crossover units71 x 71 x 6 cm (l x w x h), 22 kg
Anchor pin3.5 x 100 cm

Specifications Crossover L

ElementSpecification
Requirements lift/crane• Minimum lifting height: 600 cm
• Minimum safe working load: 280 kg
Transport box materialThe box is suitable for international transport because of its heat treatment according to the ISPM 15 regulation.
Fully closableWe can create a fully closed tent with side panels connected by YKK zippers. If desired, the side panels can be digitally printed on both sides.

The panels can be provided with windows and / or a door. The door can be opened by two vertical zips. These panels can only be printed on the outside.

For more information about the digital print, look under fabrics.
ConnectabilityIt is possible to connect two Crossover L units with a connection gutter. This can be applied by using the YKK zips.
AnchoringThe anchor points of the Crossover L are on the four corners of the structure. If more support is desired, we can provide additional anchor points.

Anchoring with anchor pins:
• For soft surfaces.
• The pins can be installed with a sledgehammer or with a mechanical device.
• The pins can easily be removed with an optional accessory pin.

Anchoring with screw connections:
• For hard surfaces.
• The feet of the structure are drilled into the hard surface with concrete screws, anchor bolts or special plugs.

Anchoring with ballast:
• For when it is not allowed to drill.
• We use concrete ballast tiles for this system.
• The tiles can be used as a bench or demo table by covering them.
• It is still possible to connect multiply Hexadomes or Crossovers with this anchoring method.

Anchoring at a stage:
• For stage roofing or part of a VIP deck.
• Can be anchored to the vertical beams of the stage with standard stage clamps.

Download our detailed anchoring manual
Mounting points There are four mounting poles in the structure which can hold 400 kg in total. This can be used to hang hardware or hold a snow load.

The corners are provided with a M10 mounting point which can hold a monitor or light fixtures. We offer an optional universal mounting kit for displays with mounting points.

Crossover L structure

ElementSpecification
Tubes6082T6 aluminum

The tubes can be powder coated or anodized:
• Powder coating: the tubes get a double layer coating from Dupont in a RAL color of your choice.
• Anodizing: the tubes will get a hard oxidize layer with a matte finish with the color of your liking.

Please contact us if you would like some personal advice or more information.
ConnectorsGalvanized S355-steel
CablesMarine grade stainless steel

Crossover L fabrics

All our fabrics are flame retardant (DIN 4102 B1, M2). If you would like some more information or personal advice, feel free contact us.

ElementSpecification
Mehler Airtex magic FR• Soft textile-like appearance
• Light weight (330g/m²)
• Faster assembly times
• Translucent
• Supplied in white, black optional

Download datasheet
Mehler Valmex Tivoli• Medium weight fabric (582g/m²)
• High gloss finish
• Available in several HDors, including silver

Download datasheet
Serge Ferrari Stam 6002• Light texture
• Matte coating
• Available in 16 HDors
• 100% recyclable

Download datasheet
DesignDownload our design template and customize it to your liking's. Once the edited design is submitted, we can process it for you to print.

Download design template
Download user instructions design template
LogosIt’s also possible to only provide the tent with your logo. The maximum width of the logo is 235cm. Download the design template and see your possibilities.

Some logos have to be applied with special epoxy paint because not all materials are printable. The maximum size is 150 x 150cm. It's only possible to use a few different HDors and may not contain gradients.
Print materials We use white or grey Airtex material. When white, the tent is illuminated from the inside. This effect is less with a grey back.

Another option is a block out material (780g/m²) so the print doesn’t shine through. If the sides are double printed on a block out material, it is recommended to use Frontlit PVC (450g/m²) material for the cover. It has the same light gloss finish and is slightly translucent.
EdgesThe edges of our product can not be printed. They are reinforced with PVC to expand their lifespan. The only option is to apply them in white or black.

GALLERY

ARE YOU INTERESTED IN OUR DOMES, PLEASE CONTACT US

CONTACT

Subscribe to our mailing list

* indicates required




error: Content is protected !!