The Hexadome M has a sleek futuristic design, inspired on a dome tent, which can be customized to your wishes. Connect multiple tents or personalize the walls with your own logo or print.

Dome tent design

The Hexadome M is inspired on a dome tent and is suitable for brand activation, hospitality, events, residential, outdoor showroom or trade shows. You can cover a large area by connecting multiple tents. Like a dome, this tent can be fully closed. The outdoor- and indoor walls of the tent can be printed in high resolution with your own design or logo.

Easy transportation

The Hexadome M is delivered in a special reusable box which also makes it easy to storage. You can stack the tubes horizontally or vertically on top of the box and because of the special access door, the items lying underneath the tubes are still accessible.

Quick and easy assembling

This dome tent can easily be assembled in two hours by two persons with a little help of a telescopic lift or crane. The components are limited in size and are made of a special aluminum which makes them light weight but strong as steel. Because of this there is no muscle strength or tools required and the components are easy to handle.

Download our building manual here or take a look at the installation video’s on our Youtube channel.


•  Central/common area

•  Event space

•  Combine with our smaller tents





Sizes Hexadome M

Hexadome MSizes
Diameter100 m²
Distance from leg to leg622 cm
Height bottom to top535 cm
Height entrance215 cm
Packaging tubes stacked vertically120 x 80 x 250 cm (l x w x h), 250 kg
Packaging tubes stacked horizontally210 x 80 x 140 cm (l x w x h), 250 kg
Packaging cover (Airtex)80 kg
Packaging side panel (Airtex)8 kg
Packaging connection gutter2 kg
Ballast support100 x 94 x 7 cm (lxwxh), 25 kg
Ballast interface 1 Crossover unit50 x 23 x 6 cm (lxwxh), 6 kg
Ballast interface multiple Crossover units71 x 71 x 6 cm (lxwxh), 22 kg
Anchor pin3.5 x 130 cm

Specifications Hexadome M

Requirements lift/crane • Minimum lifting height: 650 cm
• Minimum safe working load: 500 kg
Transport box materialThe box is suitable for international transport because of its heat treatment according to the ISPM 15 regulation.
Fully closableWe can create a fully closed tent with side panels connected by YKK zippers. If desired, the side panels can be digitally printed on both sides.

The panels can be provided with windows and / or a door. The door can be opened by two vertical zips. These panels can only be printed on the outside.

For more information about the digital print, look under fabrics.
ConnectabilityIt is possible to connect two Hexadome M units with a connection gutter. This can be applied by using the YKK zips.
AnchoringThe anchor points of the Hexadome M are on the four corners of the structure. If more support is desired, we can provide additional anchor points.

Anchoring with anchor pins:
• For soft surfaces.
• The pins can be installed with a sledgehammer or with a mechanical device.
• The pins can easily be removed with an optional accessory pin.

Anchoring with screw connections:
• For hard surfaces.
• The feet of the structure are drilled into the hard surface with concrete screws, anchor bolts or special plugs.

Anchoring with ballast:
• For when it is not allowed to drill.
• We use concrete ballast tiles for this system.
• The tiles can be used as a bench or demo table by covering them.
• It is still possible to connect multiply Hexadomes with this anchoring method.
Mounting pointsThere are four mounting poles in the structure which can hold 600 kg in total. This can be used to hang hardware or hold a snow load.

The corners are provided with a M10 mounting point which can hold a monitor or light fixtures. We offer an optional universal mounting kit for displays with mounting points.

Hexadome M structure

Tubes6082T6 aluminum

The tubes can be powder coated or anodized:
• Powder coating: the tubes get a double layer coating from Dupont in a RAL color of your choice.
• Anodizing: the tubes will get a hard oxidize layer with a matte finish with the color of your liking.

Please contact us if you would like some personal advice or more information.
ConnectorsGalvanized S355-steel
CablesMarine grade stainless steel

Hexadome M fabrics

All our fabrics are flame retardant (DIN 4102 B1, M2). If you would like some more information or personal advice, feel free contact us.

Mehler Airtex magic FR• Soft textile-like appearance
• Light weight (330g/m²)
• Faster assembly times
• Translucent
• Supplies in white, black optional

Download datasheet
Mehler Valmex Tivoli • Medium weight fabric (582g/m²)
• High gloss finish
• Available in several HDors, including silver

Download datasheet
Serge Ferrari Stam 6002 • Light texture
• Matte coating
• Available in 16 HDors
• 100% recyclable

Download datasheet
DesignDownload our design template and customize it to your liking's. Once the edited design is submitted, we can process it for you to print.

Download design template
Download user instructions design template
LogosIt’s also possible to only provide the tent with your logo. The maximum width of the logo is 235cm. Download the design template and see your possibilities.

Some logos have to be applied with special epoxy paint because not all materials are printable. The maximum size is 150 x 150cm. It’s only possible to use a few different HDors and may not contain gradients.
Print materialsWe use white or grey Airtex material. When white, the tent is illuminated from the inside. This effect is less with a grey back.

Another option is a block out material (780g/m²) so the print doesn’t shine through. If the sides are double printed on a block out material, it is recommended to use Frontlit PVC (450g/m²) material for the cover. It has the same light gloss finish and is slightly translucent.
EdgesThe edges of our product can not be printed. They are reinforced with PVC to expand their lifespan.