HEXADOME L

This innovative tent design has been fitted with every conceivable comfort. Fully closable, beautifully lit at night and easy to set up. Choose your own design and connect multiple tents with the Hexadome L.

Design

The Hexadome L is great for brand activation, hospitality, events, residential, outdoor showroom or trade shows. It is possible to connect multiple tents and the zips make it possible to close the entire tent.

High quality print

You can personalize the Hexadome L completely to your wishes. The roof and walls can be digitally printed in a high resolution. Also the tubes can be coated or anodized.

Quick and easy assembling

The Hexadome L can be assembled in two and a half hours by three persons with a little help of a crane or telescopic lift. The small components, that are made of a special aluminum, are very easy to handle. They are light weight but strong as steel. There is no muscle strength or tools required.

Download our building manual here or take a look at the installation video’s on our Youtube channel.

USE AS

•  Central/common area

•  Event space

•  Combine with our smaller tents

READY TO START YOUR OWN PROJECT?

CONTACT US

GALLERY

SPECIFICATIONS

Sizes Hexadome L

Hexadome LSizes
Diameter175 m²
Distance from feet to feet829 cm
Height bottom to top715 cm
Height entrance250 cm
Packaging tubes stacked horizontally300 x 150 x 233 cm (l x w x h), 1500 kg
Packaging cover (Airtex)123.5 kg
Packaging side panel (Airtex)60 x 10 x 10 cm (l x w x h), 8.5 kg
Packaging connection gutter45 x 30 x 10 cm (l x w x h), 2.4 kg
Ballast support
Ballast interface 1 Crossover unit
Ballast interface multiple Crossover units
Anchor pin3.5 x 130 cm, 2.5 kg

Specifications Hexadome L

ElementSpecification
Requirements lift/crane• Minimum lifting height: 10 m
• Minimum safe working load: 1200 kg
Transport box materialThe box is suitable for international transport because of its heat treatment according to the ISPM 15 regulation.
Fully closableWe can create a fully closed tent with side panels which connect through YKK zips. If desired, the side panels can be digitally printed on both sides.

The panels can be provided with windows and / or a door. The door can be opened by two vertical zips. These panels can only be printed on the outside.

For more information about the digital print, look under fabrics.
ConnectabilityIt is possible to connect two Hexadome L units with a connection gutter. This can be applied by using the YKK zippers.
AnchoringThe anchor points of the Hexadome L are on the four corners of the structure. If more support is desired, we can provide additional anchor points.

Anchoring with anchor pins:
• For soft surfaces.
• The pins can be installed with a sledgehammer or with a mechanical device.
• The pins can easily be removed with an optional accessory pin.

Anchoring with screw connections:
• For hard surfaces.
• The feet of the structure are drilled into the hard surface with concrete screws, anchor bolts or special plugs.

Anchoring with ballast:
• For when it is not allowed to drill.
• We use concrete ballast tiles for this system.
• The tiles can be used as a bench or demo table by covering them.
• It is still possible to connect multiply Hexadomes with this anchoring method.
Mounting pointsThere are four mounting poles in the structure which can hold 600 kg in total. This can be used to hang hardware or hold a snow load.

The corners are provided with a M10 mounting point which can hold a monitor or light fixtures. We offer an optional universal mounting kit for displays with mounting points.

Hexadome L structure

ElementSpecification
Tubes6082T6 aluminum

The tubes can be powder coated or anodized:
• Powder coating: the tubes get a double layer coating from Dupont in a RAL color of your choice.
• Anodizing: the tubes will get a hard oxidize layer with a matte finish with the color of your liking.

Please contact us if you would like some personal advice or more information.
ConnectorsGalvanized S355-steel
CablesMarine grade stainless steel

Hexadome L fabrics

All our fabrics are flame retardant (DIN 4102 B1, M2) and can be personalized. If you would like some more information or personal advice, feel free to contact us.

ElementSpecification
Mehler Airtex magic FR• Soft textile-like appearance
• Light weight (330g/m²)
• Faster assembly times
• Translucent
• Supplies in white, black optional

Download datasheet
Mehler Valmex Tivoli• Medium weight fabric (582g/m²)
• High gloss finish
• Available in several HDors, including silver

Download datasheet
Serge Ferrari Stam 6002• Light texture
• Matte coating
• Available in 16 HDors
• 100% recyclable

Download datasheet
DesignDownload our design template and customize it to your liking's. Once the edited design is submitted, we can process it for you to print.

Download design template
Download user instructions template
LogosIt’s also possible to only provide the tent with your logo. The maximum width of the logo is 235cm. Download the design template and see your possibilities.

Some logos have to be applied with special epoxy paint because not all materials are printable. The maximum size is 150 x 150cm. It’s only possible to use a few different HDors and may not contain gradients.
Print materialsWe use white or grey Airtex material. When white, the tent is illuminated from the inside. This effect is less with a grey back.

Another option is a block out material (780g/m²) so the print doesn’t shine through. If the sides are double printed on a block out material, it is recommended to use Frontlit PVC (450g/m²) material for the cover. It has the same light gloss finish and is slightly translucent.
EdgesThe edges of our product can not be printed. They are reinforced with PVC to expand their lifespan.

ARE YOU INTERESTED IN OUR DOMES, PLEASE CONTACT US

CONTACT